PROPERTY

Color

Density (g/cm³)

Tack Free Time (Hr)

Tensile Strength (Mpa)

Curing Speed (mm/24h)

Elongation at Break (%)

Solid Content (%)

Operation Temperature ( ℃)

Service Temperature ( ℃)

Shelf Life (Month)

FBCC MS910

White, Grey, Black

1.35±0.1

<6

>1

3 ～ 5

≥ 800

＞90

5-35 ℃

-40~+120℃

9

Storage Notice

1. Sealed and stored in
cool and dry place.

2. It is suggested to be
stored at 5~25 ℃, and the
humidity is less than
50%RH

3. If the temperature is
higher than 40 ℃ or the
humidity is more than
80%RH, the shelf life may
be shorter.

Packing

5kg/Drum, 20kg/Drum,
25KG/Drum

Note: All data above were tested under standard condition.

Applications

Building external and internal waterproofing. Waterproofing and moisture proofing for roofs, foundations, terraces, retaining walls, planters etc . Anti-seepage of reservoir, water tower, water tank, swimming pool, bath, fountain pool, sewage treatment pool and drainage irrigation channel.
Leak-proofing and anti-corrosion for ventilated basement, underground tunnel,
deep well and underground pipe and so on. Bonding and moisture proofing of all kinds of tiles, marble, wood, asbestos and so on.

Preparation for Operation:

1. Tools ： The serrated plastic board, brush, plastic barrels, 30Kg electronics,
rubber gloves and cleaning tools like blade .etc
2. Environmental requirements：The temperature is 5~35 C and the humidity is
35 ~ 85%RH
3. Cleaning：The substrate surface must be solid, dry and be clean. Such as no
dust, grease, asphalt, tar, paint, wax, rust, water repellent, curing agent,
isolating agent and film. Surface cleaning can be dealt with by removing,
cleaning, blowing, and so on.
4.Make the substrate surface level：If there are cracks on the substrate surface,
first step is to fill them, and the surface should be leveled. Operation after the
sealant curing more than 3mm.
5.Theoretical dosage: 1.0mm thick, 1.3 Kg /㎡ coating needed

Operation:

First Step
Brushing the part like corner, tubes root. When operation,It should be considered about the size, shape and environment of the construction area.
Second Step
Symmetrical scraping. The best thickness of the coating is no more than 2mm to prevent the bubbles.
Protection:
If necessary, a proper protective layer can be operated on the surface of the coating.

Tools Cleaning

and other alcohol solvents.If it is not used for a long time, it should be cleaned immediately with alcohol or other organic solvents. The cured glue can only be scraped or torn off. Tools Cleaning It can be soaked in toluene or xylene. It is strictly forbidden to immerse in alcohol and other alcohol solvents. If it is not used for a long time, it should be cleaned immediately with alcohol or other organic solvents. The cure glue can only be scraped or torn off

Attention of Operation :

1. Don’t mix alcohol into the product, it will cause the product invalid. The tools with the
alcohol can’t be used before cleaning well.
2. The total coating thickness is around 2.0mm, special parts should be more than 2.0mm.
3. Avoid water, pollution and damage before tack free time of the coating,prohibit any
operation before full curing (about 24Hrs).
4. Ventilated environment is required as operating, and some necessary safety
precautions should be taken. During operation, records should be filled in truthfully. For
special projects, follow the construction description strictly.
5. Avoid contact with eyes and skin. If contact with your skin, scrub first with soap water
or alcohol, then rinse with water. If contact with your eyes, rinse with plenty of water, and
seek medical treatment immediately.
6. It is forbidden to build on the surface of the wet substrate.
7. Transportation: Avoid damp, high temperature,isolation and rain, far away from heat,
handle with care and prohibit extrusion collision.

Warranty and Liability:

All product properties and application details based on information believe to be reliable and
accurate. But you still need to test its property and safety before application. The advices we
supply don’t apply in any circumstances. SEPNA don’t make assurance of any other applications
outside the specification until SEPNA supply a special written guarantee. SEPNA is only
responsible to replace or refund if this product is defective within the warranty period stated
above. SEPNA makes it clear that will not be liable of any accidents