- +(855) 93 456 678
- 84, Street 199, Tumnub Teuk, Phnom Penh
- info@fixebuilding.com
superbond – roof coat
Waterproofing pa8int (Water Based)
Superbond – Roof Coat Is a liquid waterproofing. Type is acrylicpolymers.Type is single-element.Waterproofing paint for the roof of the old and new. Surfaces, including iron, zinc and concrete. The paint and leave to dry. Superbond – Roof coat will turn into a highly flexible sheets. Air can flow While the properties waterproofing of the water.
Advantage:
- Easy to use ,Highly flexible
- Protect Waterproofing of the Water.
- Durable corrosion resistant And good water pressure..
- No toxic, Rain does not dirty. And do not harm the environment.
- Resistant to UV radiation
- Suitable for use on the surface, as well as zinc. Roof tiles, galvanized steel.
- Steel and concrete flooring
Uses:
Superbond roof coat using a liquid liner brush or spray. Available in many areas, such as
– Gutters – Tunnel
– Roof – Basement
– Parking – Concrete floor
– Concrete cracks
Technical Data:
Feature: Dark Grey Powder
Color: White,Grey,Green
Apparent S.G.: 1.4
Solid Contain: 60%
PH Value of paste: 8.0-9.0
Elongation: 180%
Between each layer of paint: Not fire
Lowest temperature: 5 0C
Rate of use: 0.7 KG./SQM/1 Floor
Packaging: 20 KG./Bucket
Shelf life: 12 Month/Unopened containers
Advice for use:
Surface preparation : Clean surface to clean without using water, oil, dust, scrub with a wire brush. And use water to clean it again. If a crack is moving to make repairs before. Using Superbond-roof coat paint cracks and covered by glass while wet. And left to dry before priming.
Ratio mixed : For priming concrete surfaces should Superbond-Roof Coat mixed with water. 1:1 for zinc or galvanized steel surfaces, use a regular airing. available If the color is too thick, mix 5-10% water, then stir to mix well before use.
How to use : SUPERBOND-ROOF COAT use should be preserved. Mix well before using. Mix thePriming SUPERBOND-ROOF COAT 1:1 with water in case of cracks.Wider than 1 mm to make repairs before paint .SUPERBOND-ROOF COAT crevice approximately 5 cm. And covered by glass fiber 4 cm, while the paint is still wet finished .Primer over immediately with a brush or roller. Allow to dry. About 2 hours after the coating layer 2 by mixing with water SUPERBOND-ROOF COAT by 5 % -10 % Grade 3 , using volumes. 2 equal layers , each layer let it dry for about 2 hours. After the work is done , wash with clean water immediately.
Advantage:
- Easy to use ,Highly flexible
- Protect Waterproofing of the Water.
- Durable corrosion resistant And good water pressure..
- No toxic, Rain does not dirty. And do not harm the environment.
- Resistant to UV radiation
- Suitable for use on the surface, as well as zinc. Roof tiles, galvanized steel.
- Steel and concrete flooring
Uses:
Superbond roof coat using a liquid liner brush or spray. Available in many areas, such as
– Gutters – Tunnel
– Roof – Basement
– Parking – Concrete floor
– Concrete cracks
Technical Data:
Feature: Dark Grey Powder
Color: White,Grey,Green
Apparent S.G.: 1.4
Solid Contain: 60%
PH Value of paste: 8.0-9.0
Elongation: 180%
Between each layer of paint: Not fire
Lowest temperature: 5 0C
Rate of use: 0.7 KG./SQM/1 Floor
Packaging: 20 KG./Bucket
Shelf life: 12 Month/Unopened containers
Advice for use:
Surface preparation : Clean surface to clean without using water, oil, dust, scrub with a wire brush. And use water to clean it again. If a crack is moving to make repairs before. Using Superbond-roof coat paint cracks and covered by glass while wet. And left to dry before priming.
Ratio mixed : For priming concrete surfaces should Superbond-Roof Coat mixed with water. 1:1 for zinc or galvanized steel surfaces, use a regular airing. available If the color is too thick, mix 5-10% water, then stir to mix well before use.
How to use : SUPERBOND-ROOF COAT use should be preserved. Mix well before using. Mix thePriming SUPERBOND-ROOF COAT 1:1 with water in case of cracks.Wider than 1 mm to make repairs before paint .SUPERBOND-ROOF COAT crevice approximately 5 cm. And covered by glass fiber 4 cm, while the paint is still wet finished .Primer over immediately with a brush or roller. Allow to dry. About 2 hours after the coating layer 2 by mixing with water SUPERBOND-ROOF COAT by 5 % -10 % Grade 3 , using volumes. 2 equal layers , each layer let it dry for about 2 hours. After the work is done , wash with clean water immediately.
contact us
+(855) 93 456 678
